Alfahim Pump Technologies

PUMP DESIGN FEATURES

Aquas30 Easy Repair Clamp is designed for the repair of damage caused by Asbestos Cement Pipe, PE, PVC, GRP, Steel, Ductile, PIK and Galvanized pipes. Repair clamps are used on pipelines, wastewater systems, drinking water, chemical water distribution mining, oil and gas distribution, airports, sea ports and ships.

Material of body, nuts, bolts and washers is AISI304 or AISI316 stainless steel. The bolts are covered with “Teflon” for the purpose of wrapping and tightening. Material of rubber gasket is EPDM, NBR, SBR or VITON. Aquas30 Easy Repair Clamps have 3 sections. And the use of the Aquas30 Easy Repair Clamp is recommended for DN600 and above pipe diameters.

	Aquas30 Ø276-560 mm L=400 - 800 mm	Aquas30 Ø560-820 mm L=400 - 800 mm	Aquas30 Ø820-1200 mm L= 800 mm
1-Bolts	M16 x 12	M16 x 18	M16 x 24
2-Nuts	M16 x 12	M16 x 18	M16 x 24
3-Armour Plate	1,5 mm	1,5 mm	1,5 mm
4-Body Shell	1,5 mm	1,5 mm	1,5 mm
5-Gasket	EPDM / NBR	EPDM / NBR	EPDM / NBR
6-Lifter Bar (U Type)	2,5 mm	2,5 mm	2,5 mm
7-Side Bar	3 – 4 mm	3 – 4 mm	3 – 4 mm
8-Guide Bar	2 – 3 mm	2 – 3 mm	2 – 3 mm

	Aquas30 Ø276-560 mm L=400 - 800 mm	Aquas30 Ø560-820 mm L=400 - 800 mm	Aquas30 Ø820-1200 mm L= 800 mm
1-Bolts	M16 x 12	M16 x 18	M16 x 24
2-Nuts	M16 x 12	M16 x 18	M16 x 24
3-Armour Plate	1,5 mm	1,5 mm	1,5 mm
4-Body Shell	1,5 mm	1,5 mm	1,5 mm
5-Gasket	EPDM / NBR	EPDM / NBR	EPDM / NBR
6-Lifter Bar (U Type)	2,5 mm	2,5 mm	2,5 mm
7-Side Bar	3 – 4 mm	3 – 4 mm	3 – 4 mm
8-Guide Bar	2 – 3 mm	2 – 3 mm	2 – 3 mm

AQUAS30 EASY REPAIR CLAMP (TRIPLE BAND) PUMP USAGE AREAS

AQUAS30 EASY REPAIR CLAMP (TRIPLE BAND)

Related Products

AQUA-TAPPING SADDLE

AQUAS10 EASY REPAIR CLAMP (SINGLE BAND)

AQUAS20 EASY REPAIR CLAMP (DOUBLE BAND)

TAPPING CLAMPS AQUAS ATC - ATS