Capacity : ..
Head : ..
Working Temperature : ..
Casing Pressure (Pmax) : ..
Product Book Download
PUMP DESIGN FEATURES
- Disc Diffusers can be installed to HDPE, PVC or stainless steel pipes by PP Saddles.
- Material of frame and lower part is PP (polypropylene) and supported with %30 GPR for UV rays and different chemical processes.
- Connections are 3/4" or 1” male.
- Standart material of diffuser membranes are EPDM. Also Aquaflex supports the customers with SILICON and PTFE COATED membranes for different treatment processes.
- When the air flow is stopped, the gaps on the membrane close themselves because of its conic structure, in order to prevent the sludge and particulate matter fill.
- Maximum oxygen efficiency is aimed while different production techniques with carefully chosen materials
- It warrants between 35%-45% oxygen efficiency.
- It holds energy costs very low because of minimum pressure loss.
- The aeration costs loom very large at total operation costs. Because of that reason, Aquaflex Disc Diffusers decrease the operation costs minimum.
|
Type of Product |
Total Height (mm) | Perforated Area / Outer Diameter (mm) | Effective Area (m2) | Capacity (Nm3/h) | Design Capacity (Nm3/h) | Material of Membrane | Total Weight (kg) | Number of Slots |
Outlet |
|
ADD300-12" Disc Diffuser |
61 | 300/340 | 0,066 | 1-12 | 5-8 | EPDM - Silicon - PTFE Coated | 1,3 | 10900 |
3/4" - 1" Male |
AQUAFLEX ADD300-12” DISC DIFFUSER PUMP USAGE AREAS
Aquaflex disc diffusers are manufactured with latest technology of present day and used at waste water treatment plants. The projection of each diffusers of Aquaflex was done after Research and Development studies that response the requests of waste water treatment plants. The materials of Aquaflex diffusers are chosen carefully according to processes of waste water treatment plant and coordinately check before delivery.
