Capacity : ..
Head : ..
Working Temperature : ..
Casing Pressure (Pmax) : ..
Product Book Download
PUMP DESIGN FEATURES
- Aquaflex Tube Diffusers can be installed to stainless steel box profiles by stainless steel long nipples.
- Also, Tube Diffusers can be installed to HDPE, PVC or Stainless Steel pipes by PP Saddles with stainless steel short nipples.
- Connections are 3/4" or 1” female. Also male options are available.
- It is very suitable to be used in moving (retractable) systems.
- Material of pipe part is PP (polypropylene) and supported with %30 GPR for UV rays and different chemical processes.
- After the membrane is poured on the PP pipe, clamps are mounted on both sides and thus the product will be finalized.
- Standart material of diffuser membranes are EPDM. Also Aquaflex supports the customers with SILICON, TPU and PTFE COATED membranes for different treatment processes.
- When the air flow is stopped, the gaps on the membrane close themselves because of its conic structure, in order to prevent the sludge and particulate matter fill.
- Maximum oxygen efficiency is aimed while different production techniques with carefully chosen materials.
- It warrants between 35%-45% oxygen efficiency.
- It holds energy costs very low because of minimum pressure loss.
- The aeration costs loom very large at total operation costs. Because of that reason, Aquaflex Tube Diffusers decrease the operation costs minimum.
|
Type of Product |
Total Diameter (mm) | Perforated Area / Total Area (mm) | Effective Area (m²) | Capacity (Nm³/h) | Material of Membrane | Total Weight (kg) |
Outlet |
|
ATD63-500 |
67 | 500/560 | 0,1 | 2-8 | EPDM – Silicon – PTFE - TPU | 0,8 | 3/4" or 1” |
| ATD63-750 | 67 | 750/810 | 0,12 | 2-10 | EPDM – Silicon – PTFE - TPU | 1,1 |
3/4" or 1” |
|
ATD63-1000 |
67 | 1000/1060 | 0,16 | 2-12 | EPDM – Silicon – PTFE - TPU | 1,4 | 3/4" or 1” |
| ATD90-500 | 94 | 500/560 | 0,2 | 2-12 | EPDM – Silicon – PTFE - TPU | 1,25 |
3/4" or 1” |
|
ATD90-750 |
94 | 750/810 | 1,25 | 2-14 | EPDM – Silicon – PTFE - TPU | 1,65 | 3/4" or 1” |
| ATD90-1000 | 94 | 1000/1060 | 1,32 | 2-16 | EPDM – Silicon – PTFE - TPU | 2 |
3/4" or 1” |
|
ATD118-1350 |
121 | 1350/1410 | 0,70 | 2-48 | EPDM – Silicon – PTFE - TPU | 3,65 |
1” Female or Modular |
AQUAFLEX TUBE DIFFUSERS PUMP USAGE AREAS
Aquaflex tube diffusers are best solution for long and narrow aeration tanks. Opportunity to choose different material, connection thread, and size makes Aquaflex tube diffusers fit to any type of waste water. The diffusers in Aquaflex are produced with the latest technology and the diffusers are used in wastewater treatment plants. The projection of each diffusers of Aquaflex was done after Research and Development studies that response the requests of waste water treatment plants. Materials used in Aquaflex diffusers are carefully selected according to the processes of wastewater treatment plants and tested regularly before shipment.
