AQUAFLEX APD650 PLATE DIFFUSER

PUMP DESIGN FEATURES

- They can be mounted easily with the help of AISI304 or AISI316 plate and bolt pin to the Stainless box section
- They can be also mounted to the HDPE, PVC or Steel Pipes with the help of saddle.
- Body and frame material of diffusers is (PP) polypropylene. And using 30% CFR (fiberglass) its production to increase the strength of the material to different chemicals and high temperatures and harmful UV rays
- It’s pretty suitable for using at movable (Up and Down) systems.
- The joint part of plate diffuser is manufactured for a saddle is 1’’ external grooved and for box section 30 mm (external outlet male).
- The membrane of plate diffusers are EPDM as standard. However, according to biological process it can be different as Silicon, PTFE (Teflon) covered.
- When the air flow is stopped, the gaps on the membrane close themselves because of its conic structure, in order to prevent the sludge and particulate matter fill.
- Maximum oxygen efficiency is aimed while different production techniques with carefully chosen materials.
- It warrants between 35%-45% oxygen efficiency.
- It holds energy costs very low because of minimum pressure loss.
- The aeration costs loom very large at total operation costs. Because of that reason, Aquaflex Plate Diffusers decrease the operation costs minimum.